Tag: manufacturers standardization society
MSS Appoints New President & Officers
During the Annual Membership Meeting on May 6th, 2021, the Manufacturers Standardization Society (MSS) of the Valve and Fittings Industry membership elected Jim Barker of DeZURIK, Inc.
MSS Released Revised Standard for SP-51-2021
The Manufacturers Standardization Society (MSS) of the Valve and Fittings Industry recently announced that SP-51-2021, Class 150LW Corrosion Resistant Flanges and Cast Flanged Fittings, has been revised and published by MSS.
Revised Standard: Pressure Testing of Knife Gate Valves
The Manufacturers Standardization Society (MSS) of the Valve and Fittings Industry announced that SP-151-2021, Pressure Testing of Knife Gate Valves, was recently revised and published by MSS.SP-151 was published in 2016 to provide a uniform means of testing knife gate valves used in the ‘full open’ and ‘full closed’ type of service for isolation.
MSS Releases Updated SP-94-2020 Standards
The Manufacturers Standardization Society (MSS) of the Valve and Fittings Industry recently announced that SP-94-2020, Quality Standard for Steel Castings and Forgings for Valves, Flanges, Fittings, and Other Piping Components – Ultrasonic Examination Method, has been updated and published.
MSS Has Published 2 Revised Industry Standards
The Manufacturers Standardization Society (MSS) of the Valve and Fittings Industry recently announced that ANSI/MSS SP-144-2020, Pressure-Seal Bonnet Valves, has been approved by the American National Standards Institute (ANSI) as a revised American National Standard (ANS) and published by MSS.
MSS Revises Standard for Ductile Iron Swing Check Valve
The Manufacturers Standardization Society (MSS) of the Valve and Fittings Industry has announced that the SP-136-2020, Ductile Iron Swing Check Valves, has been revised and published by MSS.Standard Practice (SP)-136 was originally published in 2007 and continues to serve the industry by providing requirements for ductile iron swing check valves with flanged, threaded, mechanical-joint, push-on, grooved, and shoulder ends for general purpose usage.
MSS publishes New Eccentric Plug Valves Standards
The Manufacturers Standardization Society (MSS) of the Valve and Fittings Industry has recently published the new Standard Practice SP-156-2019, Ductile Iron, Metal-Seated, Non-Lubricated, Eccentric Plug Valves.
Updated Knife Gate Valve Standards Published by MSS
The Manufacturers Standardization Society (MSS) of the Valve and Fittings Industry recently announced that the standard SP-146-2019, High Pressure Knife Gate Valves: Iron and Ductile Iron, Lug-, Wafer- and Flange-Type, has been revised and re-published.